Dragy GPS Suction Cup Mount - Vehicle Accessory for Glass/Windshields (Compatible with DRG69/70)
Dragy GPS Suction Cup Mount - Vehicle Accessory for Glass/Windshields (Compatible with DRG69/70)
Couldn't load pickup availability
Mount your Dragy GPS Performance Meter to any windshield with our Dragy GPS Suction Cup Mount. Top-loading design lets you insert your device in any orientation — front, back, left, or right. Compatible with DRG69, DRG70, and DRG70C models.
Key Features
- 4-Way Orientation: Position to prevent LED glare or monitor status
- Secure Top-Loading: Two sturdy tabs hold your Dragy firmly in place
- Dual USB Access: Charging ports accessible from both sides
- 4x Suction Cups: 30mm cups for reliable windshield hold
- UV-Resistant ASA: Built for sun exposure and heat
- 18 Colors: Match your car's interior
Specifications
Dimensions: 97mm x 47mm x 18mm (3.8" x 1.8" x 0.7")
Material: UV-resistant ASA
Suction Cups: 4x 30mm (pre-installed)
Fits: Dragy DRG69, DRG70, DRG70C
What's Included
- 1x Dragy Suction Cup Mount
- 4x 30mm suction cups (pre-installed)
Note: Dragy GPS Performance Meter sold separately.
Guides & Resources
Guides & Resources
Designed and Printed In-House
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Frequently asked questions
Frequently asked questions
Which Dragy models does it fit?
Which Dragy models does it fit?
The DRG69, DRG70, and DRG70C GPS performance meters.
Can I charge the Dragy while it's mounted?
Can I charge the Dragy while it's mounted?
Yes — the USB charging ports are accessible from both sides of the mount.
Can I position it to avoid LED glare?
Can I position it to avoid LED glare?
Yes. The top-loading design accepts the device in any of four orientations, so you can face the status LEDs toward or away from you.
How should I clean the glass before installing?
How should I clean the glass before installing?
Wipe the interior glass thoroughly with isopropyl alcohol and let it dry completely. Skip soap and water, since residue interferes with suction, and even a thin film of dust or wax noticeably reduces grip.
Is a 3D-printed mount strong enough?
Is a 3D-printed mount strong enough?
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Limited lifetime warranty & returns
Limited lifetime warranty & returns
Every Moonlight Mounts product is designed and printed in-house, and it’s backed by our limited lifetime warranty: for as long as you own it, we replace manufacturing defects and missing parts free of charge and pay the shipping on the replacement. Wear parts such as suction cups and adhesive aren’t covered. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. The full warranty terms are in our refund policy.
Highlights
- Designed & printed in-house near Atlanta, Georgia
- Fits Dragy DRG69, DRG70 & DRG70C
- 4-way orientation, top-loading design
- Charging ports accessible from both sides
- UV-resistant ASA in 18 colors
Specifications
| Fits | Dragy DRG69, DRG70, and DRG70C (device sold separately) |
|---|---|
| Dimensions | 97 × 47 × 18 mm (3.8 × 1.8 × 0.7 in) |
| Suction cups | 4× 30 mm, pre-installed |
| Orientation | 4-way — insert front, back, left, or right |
| USB access | Charging ports reachable from both sides |
| Material | UV-resistant ASA |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Colors | 18 colors |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |