Starlink Mini Suction Cup Mount - Compact Edition for Small Sunroofs, Boat Hatches (UV Protected)
Starlink Mini Suction Cup Mount - Compact Edition for Small Sunroofs, Boat Hatches (UV Protected)
Couldn't load pickup availability
Transform your boat, RV, or vehicle with a compact sunroof into a mobile connectivity hub with our Starlink Mini compact mount. Specifically designed for smaller moonroofs, boat hatches, and tight installations, this space-saving mount brings satellite internet to vehicles where space is at a premium.
Key Features:
- For Interior Glass Mounting Only
- Compact Footprint: Only 16.5 x 10.25 inches - perfect for small sunroofs and boat hatches
- Versatile Mounting: Attaches to small windshields, compact sunroofs, boat hatches, or any glass surface
- Smart Cable Management: Built-in channels for neat organization
- Durable ASA Material: UV-resistant and recyclable
- Quick Installation: Simple two-step process
Tesla note: Pre-2025 Model Y and Model 3 roofs pass the Starlink signal and this mount works there. Tesla's newer heat-rejecting glass does not: the 2025 and later Model Y roof, the Model Y L roof and rear hatch, and the Cybertruck roof all have a metallic layer that blocks the signal. The front windshield on those vehicles does pass signal, but suction mounts on a windshield are for parked use only. If you're not sure which glass you have, set the dish on the seat under the roof and check the Starlink app for a connection before ordering.
Note: This Compact Edition has a lower profile footprint but extends 85.833 mm (3.379 inches) down from the glass surface. Due to this clearance requirement, this mount will not fit behind sunroof shades. Need a mount that fits under sunroof shades? Check out our original Starlink Mini Suction Cup Mount.
Ideal For:
- Boats with small overhead hatches
- Compact sunroofs without shades
- RV skylights and small windows
- Marine vessels requiring connectivity
- Vehicles where traditional mount is too large
Product Dimensions:
- Footprint: 16.5 x 10.25 inches (419.1 mm x 260.35 mm)
- Glass-to-Mount Depth: 85.833 mm (3.379 inches)
Included (pre-assembled):
- 2x ASA Mount Brackets
- 4x Heavy Duty Suction Cups
- Installation Instructions
Compatibility: Starlink Mini (sold separately)
Installation
Installation
- Clean mounting surface thoroughly
- Attach to Starlink Mini Dish by sliding each bracket over the sides of the Starlink Mini dish. Note: Do not snap them on. They should slide on easily from the sides.
- Release latch on suction cups
- Attach to vehicle interior glass by firming pushing the suction cup onto the surface, rotate latch handle to secure.
- If suction cups become warped, remove them from mount and soak in hot water to reset their shape.
- Need a replacement cup? We sell suction cup anchors individually.
Designed and Printed In-House
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Frequently asked questions
Frequently asked questions
Will it fit behind my sunroof shade?
Will it fit behind my sunroof shade?
No. The Compact Edition extends 3.379 inches down from the glass, so the shade cannot close over it. If you need to close your shade, our original Starlink Mini suction cup mount sits at 1.75 inches and fits under most shades.
How is this different from the original suction cup mount?
How is this different from the original suction cup mount?
The footprint is much smaller — 16.5 by 10.25 inches — so it fits small sunroofs, boat hatches, and RV skylights where the original is too large. The trade-off is that it hangs 3.379 inches below the glass instead of 1.75 inches.
Can I drive with it installed?
Can I drive with it installed?
Yes. The mount attaches to the interior glass, so the dish rides inside the cabin and is never exposed to wind.
Does it require drilling?
Does it require drilling?
No. Four locking suction cups hold it to interior glass, and it removes cleanly.
Does it work in a Tesla?
Does it work in a Tesla?
It depends on the glass. Pre-2025 Model Y and Model 3 roofs pass the Starlink signal and this mount works there. Tesla's newer heat-rejecting glass does not: the 2025 and later Model Y roof, the Model Y L roof and rear hatch, and the Cybertruck roof all have a metallic layer that blocks the signal. The front windshield on those vehicles does pass signal, but suction mounts on a windshield are for parked use only. If you're not sure which glass you have, set the dish on the seat under the roof and check the Starlink app for a connection before ordering.
How should I clean the glass before installing?
How should I clean the glass before installing?
Wipe the interior glass thoroughly with isopropyl alcohol and let it dry completely. Skip soap and water, since residue interferes with suction, and even a thin film of dust or wax noticeably reduces grip.
Can I replace the suction cups?
Can I replace the suction cups?
Yes. The heavy-duty suction cups are replaceable, and we sell them individually as spare parts.
What if a suction cup warps?
What if a suction cup warps?
Remove it from the mount and soak it in hot water to reset its shape, then reinstall it.
Is a 3D-printed mount strong enough?
Is a 3D-printed mount strong enough?
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Limited lifetime warranty & returns
Limited lifetime warranty & returns
Every Moonlight Mounts product is designed and printed in-house, and it’s backed by our limited lifetime warranty: for as long as you own it, we replace manufacturing defects and missing parts free of charge and pay the shipping on the replacement. Wear parts such as suction cups and adhesive aren’t covered. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. The full warranty terms are in our refund policy.
Acceptable Use Disclaimer
Acceptable Use Disclaimer
Highlights
- Designed & printed in-house near Atlanta, Georgia
- 4 locking suction cups
- Compact 16.5″ × 10.25″ footprint
- UV-resistant ASA
- Replacement suction cups available
Specifications
| Compatible device | Starlink Mini (dish sold separately) |
|---|---|
| Mount location | Interior glass only — small sunroofs, boat hatches, RV skylights |
| Vehicle glass | Must pass the Starlink signal — pre-2025 Tesla Model Y and Model 3 roofs do; Tesla's 2025+ Model Y, Model Y L, and Cybertruck roof glass is metallic and blocks it (the windshield passes, parked use only) |
| Suction cups | 4 heavy-duty locking cups, individually replaceable |
| Footprint | 16.5 × 10.25 in (419.1 × 260.35 mm) |
| Glass-to-mount depth | 85.833 mm (3.379 in) |
| Sunroof shade compatibility | Will not fit behind sunroof shades — extends 3.379 in below the glass |
| Material | UV-resistant ASA, recyclable |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Cable management | Integrated routing channels |
| Drilling required | None |
| Colors | 18 colors |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |