Starlink Standard 4 Gen 3 UTA-232 Suction Cup Mount - UV Protected for Panoramic Sunroof
Starlink Standard 4 Gen 3 UTA-232 Suction Cup Mount - UV Protected for Panoramic Sunroof
- Designed & printed in-house near Atlanta, Georgia
- 8 locking suction cups in a four-corner layout
- Fits Tesla Model Y, Cybertruck & Escalade panoramic roofs
- Tool-free install — no drilling
- UV-resistant ASA
Couldn't load pickup availability
Using our Starlink Standard 4 Gen 3 suction cup mount, mount your Starlink Standard 4 Gen 3 Rev4 UTA-232 to your vehicle's panoramic sunroof with zero drilling and zero modifications. This USA-made suction cup mount features 8 industrial-grade cups in a four-corner configuration for secure, redundant attachment.
Note: This product is for the Starlink Standard 4 Gen 3 Standard Residential dish. Need a mount for the Starlink Mini? Click here.
Key Features
- Interior Glass Only: Designed for skylights and panoramic sunroofs
- 8 Heavy-Duty Suction Cups: Locking mechanism for maximum security
- UV-Resistant ASA: Won't yellow or degrade in sunlight
- Tool-Free Install: Mount and remove in minutes
- No Drilling: Preserves your vehicle warranty
Vehicle Compatibility
Works with most vehicles with flat panoramic sunroofs:
- Tesla Model Y
- Tesla Cybertruck
- Cadillac Escalade
- Other luxury SUVs with panoramic roofs
Specifications
Dimensions: 554mm x 765mm x 45mm (21.8" x 30.1" x 1.75")
Material: UV-resistant ASA — weather-resistant, thermally stable, won't yellow
Fits: Starlink Gen 3 Rev4 Standard UTA-232 (dish sold separately)
What's Included
- 4x ASA mount parts (choose your color)
- 8x Heavy-duty suction cups with locking mechanism
- Installation instructions
Installation
- Clean the mounting surface thoroughly
- Remove the 3M tape backing on each mount part
- Attach mount pieces to your Starlink Gen 3:
- Part 1 = Top-Left
- Part 2 = Top-Right
- Part 3 = Bottom-Left
- Part 4 = Bottom-Right
- Position the mount on your sunroof/skylight
- Route the power cable through the notches on parts 3 or 4
- Press each suction cup firmly and engage the locking mechanism
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Install Guides & Resources
Specifications
| Compatible device | Starlink Standard 4 Gen 3 (UTA-232 / Rev4, dish sold separately) |
|---|---|
| Mount location | Interior glass only — panoramic sunroofs and skylights |
| Suction cups | 8 heavy-duty locking cups, individually replaceable |
| Dimensions | 554 × 765 × 45 mm (21.8 × 30.1 × 1.75 in) |
| Attachment | 3M tape secures the four mount parts to the dish; suction cups to the glass |
| Vehicle fit | Tesla Model Y, Tesla Cybertruck, Cadillac Escalade, and most flat panoramic roofs |
| Cable routing | Notches on the lower mount parts |
| Drilling required | None |
| Material | UV-resistant ASA |
| Colors | 18 colors |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |
What owners say
-
Mounts are very easy to install on dish antenna. Very sturdy and fits perfectly. Just follow instructions for placement on the corners by the number that is on each mount. Recommend just a bit of water on the suction cups prior to placement on glass. Also press suction cups tightly to glass a...
— Bruce M.
-
Fit perfectly and very secure.
— Jeff L.
-
I like this approach to the larger v3, I’m counting on it to hold up to the florida sun in my Cybertruck.
— Christopher
Frequently asked questions
Which Starlink dish does this fit?
Which Starlink dish does this fit?
The Starlink Standard 4 Gen 3 residential dish — also labeled UTA-232, Rev4, V3, V4, or Standard 4 X. It does not fit the Starlink Mini or the older Gen 2 rectangular dish.
Can I drive with it installed?
Can I drive with it installed?
Yes. The mount holds the dish against the interior glass of your panoramic roof, so the dish rides inside the cabin and is never exposed to wind.
Will it fit my vehicle?
Will it fit my vehicle?
It's designed for flat panoramic sunroofs and works in the Tesla Model Y, Cybertruck, Cadillac Escalade, and similar vehicles. Check that your roof has a flat glass area at least 21.8 by 30.1 inches.
Does it require drilling?
Does it require drilling?
No. Eight locking suction cups hold it to the glass, and the whole mount removes in minutes.
How should I clean the glass before installing?
How should I clean the glass before installing?
Wipe the interior glass thoroughly with isopropyl alcohol and let it dry completely. Skip soap and water, since residue interferes with suction, and even a thin film of dust or wax noticeably reduces grip.
Can I replace the suction cups?
Can I replace the suction cups?
Yes. The heavy-duty suction cups are replaceable, and we sell them individually as spare parts.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Our guarantee
Every Moonlight Mounts product is designed and printed in-house and backed by a 14-day warranty — manufacturing defects and missing parts are replaced free of charge. Not the right fit? Returns are accepted within 14 days of delivery, including sale items. See our refund policy for details, or contact us — most issues are resolved with a quick message.
Acceptable Use Disclaimer
Acceptable Use Disclaimer
