Starlink Router Mini Wall Mount - Screw-In Bracket for RVs & Campers
Starlink Router Mini Wall Mount - Screw-In Bracket for RVs & Campers
Couldn't load pickup availability
Extend your connectivity with our Starlink Router Mini wall mount. Designed specifically for your Starlink Router Mini, this mount allows you to easily flush mount your router in your networking cabinet and extend your WiFi signal outside your RV, van, or camper.
Also available as a suction cup or VHB 3M mount.
Key Features:
- Extend Your WiFi Reach: Specifically designed to mount your Starlink Router Mini on an interior wall, boosting WiFi coverage outside your vehicle, camper, or home.
- Secure Device Mounting: Features a design that mimics the stock Starlink Router Mini mounting bracket, ensuring your router is securely fastened and stable.
- Printed in UV-Resistant ASA: This is a 3D-printed bracket, not a machined metal one. ASA is the UV-stable material used for automotive exterior trim — it won't yellow, go brittle, or warp in a sunlit window or a hot networking cabinet the way PLA and PETG do. Available in 18 colors.
- Quick & Easy Installation: Four simple steps to get your router mounted and WiFi extended in minutes.
- Optimized for Mobile Lifestyles: Perfect for digital nomads, campers, and anyone needing reliable internet access beyond the confines of their vehicle.
- First of its Kind: The premier solution for flush wall-mounting your Starlink Router Mini to expand your network.
Product Dimensions:
- 90mm x 166mm (3.54in x 6.53in)
Included (pre-assembled):
- 1x ASA Mount Bracket for Starlink Router Mini
- 4x 75lbs Drywall Anchors & Screws
Compatibility:
- Starlink Router Mini (sold separately)
Installation:
- Attach to Starlink Router Mini: Slide your Starlink Router Mini into the bottom of the bracket first, then snap the top clip over the top of the Router Mini.
- Insert Provided Drywall Anchors: Screw in drywall anchors if necessary for your wall type.
- Fasten with Provided Screws: Position the mount with the attached router onto the wall and affix the entire unit to the wall using the provided screws.
- Cable Routing: Route the Starlink Router Mini cables as needed.
Designed and Printed In-House
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Frequently asked questions
Frequently asked questions
Where would I mount it?
Where would I mount it?
Flush against an interior wall or inside a networking cabinet — anywhere you want the Router Mini fixed in place to spread WiFi through your RV, van, camper, or home.
How does the router attach?
How does the router attach?
The bracket mimics the stock Starlink Router Mini mounting bracket: slide the router in from the bottom, then snap the top clip over it.
Do I need my own anchors?
Do I need my own anchors?
No — four 75 lb drywall anchors and matching screws are included. Skip the anchors when screwing into studs or solid material.
Is there a no-drill version?
Is there a no-drill version?
Yes — the same bracket is available with pre-applied 3M VHB tape, and as a suction cup mount for windows.
Is a 3D-printed mount strong enough?
Is a 3D-printed mount strong enough?
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Our guarantee
Our guarantee
Every Moonlight Mounts product is designed and printed in-house. Manufacturing defects and missing parts are replaced free of charge, with no time limit. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. See our refund policy for details.
Highlights
- Designed & printed in-house near Atlanta, Georgia
- Flush wall mount for the Router Mini
- 4× 75 lb drywall anchors and screws included
- Mimics the stock mounting bracket
- UV-resistant ASA in 18 colors
Specifications
| Fits | Starlink Router Mini (router sold separately) |
|---|---|
| Dimensions | 90 × 166 mm (3.54 × 6.53 in) |
| Hardware | 4× 75 lb drywall anchors with screws |
| Material | UV-resistant ASA |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Colors | 18 colors |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |