Starlink Router Mini Mount - Suction Cup Window Mount for RVs (UV Protected)

Extend your connectivity with our Starlink Router Mini mount. Designed to place your Starlink Router Mini in a window, this mount is the first of its kind, allowing you to easily extend your WiFi signal outside your RV, van, camper, or home.

Also available as a screw-in or VHB 3M mount.

Key Features:

• Extend Your WiFi Reach: Specifically designed to mount your Starlink Router Mini on an interior window, boosting WiFi coverage outside your vehicle, camper, or home.
• Secure Device Mounting: Features a design that mimics the stock Starlink Router Mini mounting bracket, ensuring your router is securely fastened and stable.
• Versatile Glass Surface Mounting: Equipped with four suction cups for a strong hold on windshields, side windows, or any smooth glass surface.
• Printed in UV-Resistant ASA: This is a 3D-printed bracket, not a machined metal one. ASA is the UV-stable material used for automotive exterior trim — it won't yellow, go brittle, or warp in a sun-baked window the way PLA and PETG do. It's light by design: the suction cups only need to carry the bracket and the router itself. Available in 18 colors.
• Quick & Easy Installation: Four simple steps to get your router mounted and WiFi extended in minutes.
• Optimized for Mobile Lifestyles: Perfect for digital nomads, campers, and anyone needing reliable internet access beyond the confines of their vehicle.
• First of its Kind: The premier solution for window-mounting your Starlink Router Mini to expand your network.

IMPORTANT: For optimal performance and a secure attachment, ensure the glass surface is thoroughly cleaned and free of dust or debris before mounting. Periodically check the suction cups to ensure they maintain a strong seal, especially during significant temperature changes. Please read the removal steps below before taking the mount off the glass.

Product Dimensions:

• 119mm x 172mm (4.68in x 6.77in)

Included (pre-assembled):

• 1x ASA Mount Bracket for Starlink Router Mini
• 4x Suction Cups

Compatibility:

• Starlink Router Mini (sold separately)

Installation:

1. Clean Mounting Surface: Thoroughly clean the interior glass surface where you intend to place the mount.
2. Attach to Starlink Router Mini: Slide your Starlink Router Mini into the bottom of the bracket first, then snap the top clip over the top of the Router Mini.
3. Mount to Glass: Position the mount with the attached router onto the cleaned glass surface. Push down firmly on each suction cup to create a secure vacuum seal.
4. Cable Routing: Route the Starlink Router Mini cables as needed.

Removal — please read before taking the mount off:

1. Release the cups first. Lift the tab on each of the four suction cups to break the seal before you lift anything.
2. Then lift the mount. With all four seals released, the mount comes straight off the glass with no force.
3. Never pry or lever the mount off while the cups are still sealed. The suction cups are designed to release first. Pulling on the bracket instead puts the combined hold of four sealed cups directly onto the corners — the one load this part isn't built to take.

Maintenance Tips:

• If suction cups become dirty or lose some of their grip, remove them from the mount, clean them with mild soapy water, and allow them to air dry or wipe them clean.
• If suction cups become warped (e.g., from prolonged storage in an awkward position), you can often restore their shape by removing them from the mount and soaking them in hot (not boiling) water for a few minutes.

Install Guides & Resources

• Suction Cup Mount Guide: Starlink, Peplink & More