Starlink Router Mini Wall Mount - No-Drill 3M VHB Adhesive Bracket

Extend your connectivity with our Starlink Router Mini wall mount, VHB tape edition. Designed specifically for your Starlink Router Mini, this no-drill mount uses two strips of 3M VHB tape to flush mount your router in your networking cabinet and extend your WiFi signal outside your RV, van, or camper. No screws, no drilling, no suction cups.

Also available as a suction cup or screw-in mount.

Key Features:

• Extend Your WiFi Reach: Specifically designed to mount your Starlink Router Mini on an interior wall, boosting WiFi coverage outside your vehicle, camper, or home.
• No-Drill Installation: Two vertical strips of genuine 3M VHB tape come pre-applied to the back of the bracket. Peel, press, and you're mounted. Nothing to drill into your rig's walls, cabinetry, or fiberglass.
• Built for Surfaces You Can't Screw Into: Ideal for fiberglass, aluminum, laminate cabinet panels, painted metal networking enclosures, and rental or leased spaces where holes aren't an option.
• Secure Device Mounting: Features a design that mimics the stock Starlink Router Mini mounting bracket, ensuring your router is securely fastened and stable.
• Printed in UV-Resistant ASA: This is a 3D-printed bracket, not a machined metal one. ASA is the UV-stable material used for automotive exterior trim. It won't yellow, go brittle, or warp in a sunlit window or a hot networking cabinet the way PLA and PETG do. Available in 18 colors.
• Quick & Easy Installation: Four simple steps to get your router mounted and WiFi extended in minutes.
• Optimized for Mobile Lifestyles: Perfect for digital nomads, campers, and anyone needing reliable internet access beyond the confines of their vehicle. VHB tape holds through road vibration and rough travel.
• First of its Kind: The premier solution for flush wall-mounting your Starlink Router Mini to expand your network.

Product Dimensions:

• 90mm x 166mm (3.54in x 6.53in)

Included (pre-assembled):

• 1x ASA Mount Bracket for Starlink Router Mini
• 2x pre-applied 3M VHB tape strips

Compatibility:

• Starlink Router Mini (sold separately)

Surface Compatibility:

• Works great on: Smooth painted drywall, fiberglass, metal, glass, sealed or finished wood, laminate, most rigid plastics, and powder-coated networking cabinets.
• Not recommended for: Textured or orange-peel walls, raw or unsealed wood, brick, concrete, wallpaper, vinyl-wrapped RV wall panels, and anything with a loose or flaking finish.
• Apply at 70°F (21°C) or warmer for best results. Minimum application temperature is 50°F (10°C).

Installation:

1. Clean the Surface: Wipe the mounting area with isopropyl alcohol and let it dry completely. Skipping this step is the number one cause of a tape mount letting go. Do not use household cleaners, they leave residue that prevents bonding.
2. Peel and Press: Remove the red liners from both VHB strips, position the bracket where you want it, and press firmly along the full length of both strips for at least 30 seconds. Firm pressure is what activates the adhesive, not time.
3. Let It Set: The bond reaches roughly 90% strength in 24 hours and full strength in 72 hours. Wait at least an hour before loading the bracket.
4. Attach Your Starlink Router Mini: Slide your Starlink Router Mini into the bottom of the bracket first, then snap the top clip over the top of the Router Mini. Route the cables as needed.

Note: 3M VHB tape forms a semi-permanent bond. Removal may lift paint or damage delicate finishes. Position carefully before pressing down, since repositioning after contact weakens the bond.