Easy install. Sturdy parts.
Starlink Standard 4 Gen 3 Roof Mount - Flat Screw-In Surface Mount Kit for Permanent Installation
Starlink Standard 4 Gen 3 Roof Mount - Flat Screw-In Surface Mount Kit for Permanent Installation
Starlink Standard 4 Gen 3 Roof Mount - Flat Screw-In Surface Mount Kit for Permanent Installation
Regular price
$59.99 USD
Sale price
$59.99 USD
Regular price
$88.99 USD
Unit price
per
Free US shipping · expedited available at checkout
·
Where we ship
Limited lifetime warranty, for as long as you own it · 30-day returns
·
Details
Couldn't load pickup availability
Transform your home, RV, or van into a high-speed internet hub with our Starlink Standard 4 Gen 3 Roof Mount. This permanent surface mount fits the Starlink Gen 3 Standard UTA-232 (also known as Revision 4 or V3 or Standard 4 or Standard 4 X) and delivers a sleek, professional installation.
⚠️ Not compatible with our Starlink Gen 3 Hail Guard.
Key Features
- Weather-Resistant: Durable ASA material stands up to sun, rain, and snow
- Low-Profile Design: Blends with your roofline and allows natural airflow to keep your dish cool
- Universal Roof Compatibility: Works with shingle, metal, and flat roofs
- Secure Four-Corner Mounting: Redundant securing points for stability in high winds
Roof orientation: This mount holds the dish flat against the roof, so your roof decides where the dish points. Starlink dishes aim at the part of the sky with the most satellites, which in the US means toward the north, tilted about 20 degrees, and the Starlink app asks you to rotate the dish to within a few degrees of that target. Flat roofs on houses, RVs, and vans work well: rotate the mount to match the app's target before you screw it down. A north-facing roof slope is close to ideal. A roof that slopes toward the south tilts the dish away from the satellites and puts the ridge in its view, so expect obstruction dropouts and a misaligned alert. Before ordering, set the dish where the mount will go and run the Starlink app's obstruction check.
Specifications
Dimensions: 440mm x 615mm x 48mm (17.3" x 24.2" x 1.9")
Screw Holes: 6mm diameter, 2 per corner piece
What's Included
- 4x ASA mount brackets (labeled 1-4, choose your color)
- 8x 18-8 stainless steel oval head screws (#12 x 2")
- Installation instructions
Compatibility
- Designed for Starlink Gen 3 Rev4 Standard UTA-232 (dish sold separately)
- Suitable for all weather conditions
- Not compatible with our Starlink Gen 3 Hail Guard
Installation
Installation
- Choose a location with a clear sky view
- Position the numbered corner pieces (1-4) as labeled when facing the back of the dish:
- Part 1 = Top-Left
- Part 2 = Top-Right
- Part 3 = Bottom-Left
- Part 4 = Bottom-Right
- Insert the Starlink Gen 3 dish and secure each corner with two #12 screws
- Apply sealant under and around each mounting point for waterproofing
Note: Do not over-tighten screws. Professional installation recommended.
Recommended Sealant
Use a flexible sealant like Pro Flex RV Flexible Sealant for a long-lasting, weather-resistant seal.
Designed and Printed In-House
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
What owners say
What owners say
-
Easy install. Sturdy parts.
— Richard J.
-
Easy installation, perfect shallow mount I was looking for
— Daniel P.
Frequently asked questions
Frequently asked questions
Can I use this together with the Gen 3 hail guard?
Can I use this together with the Gen 3 hail guard?
No — the two products both occupy the dish's corners, so it's one or the other. Choose the roof mount for a permanent bolted installation, or the hail guard for impact protection.
Which Starlink dish does this fit?
Which Starlink dish does this fit?
The Starlink Standard 4 Gen 3 residential dish — also labeled UTA-232, Rev4, V3, V4, or Standard 4 X.
Is this a permanent installation?
Is this a permanent installation?
Yes. Each of the four corners bolts down with two stainless steel screws. Apply a flexible sealant such as Pro Flex RV under and around each mounting point, don't over-tighten, and consider professional installation.
Which way does my roof need to face?
Which way does my roof need to face?
This mount holds the dish flat against the roof, so your roof decides where the dish points. Starlink dishes aim at the part of the sky with the most satellites, which in the US means toward the north, tilted about 20 degrees, and the Starlink app asks you to rotate the dish to within a few degrees of that target. Flat roofs on houses, RVs, and vans work well: rotate the mount to match the app's target before you screw it down. A north-facing roof slope is close to ideal. A roof that slopes toward the south tilts the dish away from the satellites and puts the ridge in its view, so expect obstruction dropouts and a misaligned alert. Before ordering, set the dish where the mount will go and run the Starlink app's obstruction check.
Is a 3D-printed mount strong enough?
Is a 3D-printed mount strong enough?
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Limited lifetime warranty & returns
Limited lifetime warranty & returns
Every Moonlight Mounts product is designed and printed in-house, and it’s backed by our limited lifetime warranty: for as long as you own it, we replace manufacturing defects and missing parts free of charge and pay the shipping on the replacement. Wear parts such as suction cups and adhesive aren’t covered. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. The full warranty terms are in our refund policy.
Highlights
- Designed & printed in-house near Atlanta, Georgia
- Four-corner bolt-down mounting
- 8× 18-8 stainless steel screws included
- Low-profile design keeps natural airflow
- UV-resistant ASA in 18 colors
Specifications
| Compatible device | Starlink Standard 4 Gen 3 (UTA-232 / Rev4, dish sold separately) |
|---|---|
| Dimensions | 440 × 615 × 48 mm (17.3 × 24.2 × 1.9 in) |
| Screw holes | 6 mm diameter, 2 per corner piece |
| Hardware | 8× 18-8 stainless steel oval head screws (#12 × 2") |
| Roof compatibility | Shingle, metal, and flat roofs |
| Roof orientation | Flat roofs and north-facing slopes (US). A south-facing slope tilts the dish away from the satellites — expect dropouts. Run the Starlink app's obstruction check at the spot before ordering |
| Compatibility note | Not compatible with the Gen 3 hail guard |
| Material | UV-resistant ASA |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |
Customer Reviews
Overall rating: 4.0 / 5 from 3 reviews.
You should disclose that these parts are 3D printed using FDM methods. The pictures on your website have been carefully presented to hide that fact giving the impression they are injection molded or machined. 3D parts are significantly less robust than injection molded or machined parts. I purchased these parts expressly to be stronger than the Starlink mount and I am a bit concerned about them being 3D FDM printed and how they will hold up in high winds.
Starlink Gen 3 Roof Mount - Flat Screw-In Surface Mount Kit for Permanent Installation
Store owner replied: Every Moonlight Mounts mount is 3D printed in-house in UV-resistant ASA — it's stated in the "Designed and Printed In-House" section on each product page and detailed on our custom 3D printing page. It's a deliberate engineering choice: ASA is what lets these mounts live on a roof through years of sun, rain, and snow. This mount anchors with eight 18-8 stainless steel screws across four brackets and is designed for permanent outdoor exposure. If any part ever fails in the field, contact us — manufacturing defects are replaced free of charge.
Easy installation, perfect shallow mount I was looking for