Starlink Mini Magnetic Enclosure - Polycarbonate Hail Guard with Magnet Mount
Starlink Mini Magnetic Enclosure - Polycarbonate Hail Guard with Magnet Mount
Couldn't load pickup availability
Two products in one: our Starlink Mini magnetic enclosure combines a 3mm polycarbonate hail guard with 260 lbs of magnetic holding force. Mount your Starlink Mini to any steel surface while protecting it from hail, debris, and impacts.
Don't need magnets? See our Non-magnetic Enclosure.
Steel Surfaces Only: Magnets require ferromagnetic (steel) mounting surface. Not compatible with aluminum.
Key Features
- 260 lb Magnetic Hold: Four 65 lb rubber-coated neodymium magnets
- Rubber-Coated Magnets: Help protect painted surfaces and add grip against sliding
- 3mm Polycarbonate Shield: Impact-resistant, similar to Lexan®
- Quick-Access Design: Insert Starlink Mini from the side
- 18 Custom Colors: Personalize to match your setup
- UV-Resistant ASA: Won't yellow or degrade in sunlight
Specifications
Shield Size: 282mm x 244mm x 3mm (11.1" x 9.6")
Assembled Height: 54.5mm (2.15")
Overall Size: 283.3mm x 321.6mm x 54.5mm (11.2" x 12.7" x 2.15"), assembled on a Starlink Mini
Materials: UV-resistant ASA, 3mm polycarbonate, brass heat-set inserts
Magnets: 4x rubber-coated neodymium (65 lb each, 260 lb total)
Hardware: M4 Phillips screws, stainless steel M8 square nuts
What's Included
- Pre-assembled 4-piece magnetic mount frame
- Integrated polycarbonate shield
- 12x M4 Phillips head screws (12mm)
- 4x Rubber-coated neodymium magnets (pre-installed)
- 4x Stainless steel M8 square nuts
Compatibility
Designed for Starlink Mini (sold separately). Works with any ferromagnetic steel surface in all weather conditions.
Installation
Installation
- Remove four screws to access the enclosure
- Slide your Starlink Mini in from the side
- Reassemble and place on any steel surface
Designed and Printed In-House
Designed and Printed In-House
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Frequently asked questions
Frequently asked questions
What surfaces will it mount to?
What surfaces will it mount to?
Any ferromagnetic steel surface. The four magnets hold with 260 pounds of combined pull. Aluminum won't work; test your surface with any household magnet first.
Will the magnets scratch painted surfaces?
Will the magnets scratch painted surfaces?
The magnets are rubber-coated, which helps protect painted surfaces. Wipe both the surface and the magnets clean before mounting, because grit trapped under any magnet can mark the finish.
How is this different from the regular hail guard?
How is this different from the regular hail guard?
Same 3 mm polycarbonate protection, but with four 65 lb magnets built in, so it mounts to steel with no screws and no drilling. The non-magnetic enclosure flat-mounts through screw holes instead.
Can I drive with it mounted?
Can I drive with it mounted?
Treat it as a stationary mount: set it up when parked and remove it before driving.
How do I get the dish in and out?
How do I get the dish in and out?
Remove four screws and slide the Starlink Mini in from the side, then reassemble and place it on the steel surface.
Is a 3D-printed mount strong enough?
Is a 3D-printed mount strong enough?
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Where is it made?
Where is it made?
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Limited lifetime warranty & returns
Limited lifetime warranty & returns
Every Moonlight Mounts product is designed and printed in-house, and it’s backed by our limited lifetime warranty: for as long as you own it, we replace manufacturing defects and missing parts free of charge and pay the shipping on the replacement. Wear parts such as suction cups and adhesive aren’t covered. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. The full warranty terms are in our refund policy.
Highlights
- Designed & printed in-house near Atlanta, Georgia
- Hail guard and 260 lb magnet mount in one
- 3 mm polycarbonate shield
- Rubber-coated neodymium magnets
- UV-resistant ASA in 18 colors
Specifications
| Fits | Starlink Mini (dish sold separately) |
|---|---|
| Shield | 3 mm polycarbonate, 282 × 244 mm (11.1 × 9.6 in) |
| Assembled height | 54.5 mm (2.15 in) |
| Overall size | 283.3 × 321.6 × 54.5 mm (11.2 × 12.7 × 2.15 in), assembled on a Starlink Mini |
| Magnets | 4× 65 lb rubber-coated neodymium, 260 lb combined |
| Mounting surface | Steel only — not compatible with aluminum |
| Hardware | 12× M4 Phillips screws, stainless steel M8 square nuts, brass heat-set inserts |
| Material | UV-resistant ASA, polycarbonate shield |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |