Couldn't load pickup availability
Transform your vehicle into a mobile connectivity hub with our Starlink Mini suction cup mount. Perfect for road trips, camping, or any adventure, this innovative mount brings satellite internet to your vehicle with ease.
IMPORTANT: Before purchasing, and if you intend on closing your sunroof shade, please measure your sunroof shade clearance. When attached to the Starlink Mini, the total height from glass to the furthest point of the mount/dish is exactly 1.75 inches. We recommend allowing for additional clearance if you are unsure about fitment with your specific vehicle's sunroof shade.
Tesla note: Pre-2025 Model Y and Model 3 roofs pass the Starlink signal and this mount works there. Tesla's newer heat-rejecting glass does not: the 2025 and later Model Y roof, the Model Y L roof and rear hatch, and the Cybertruck roof all have a metallic layer that blocks the signal. The front windshield on those vehicles does pass signal, but suction mounts on a windshield are for parked use only. If you're not sure which glass you have, run an app obstruction test before ordering: hold the dish against the roof glass where the mount will go and check the Starlink app for a connection and obstructions.
Compatibility: Starlink Mini (sold separately)
Every Moonlight Mounts product is designed and 3D printed in-house just outside Atlanta, Georgia, backed by 12+ years of 3D printing experience. Made in the USA — produced in 1–3 business days, with spare parts available individually.
Holds the Starlink securely and suction cups work great! Fantastic product. Haven’t tested off-road with major bumps, but day-to-day for sure a must buy.
— Ryne H.
product works fine on my panoramic rear roof window in Bmw. was a little hard to get stuck to the glass so I removed the suction cups and reinstalled them so I could push the suction cup lever with the mini in place. been fine since.
— Richard A.
Fits nicely in a 2026 Ram with moonroof. Can place unit in the back and pull the sun shade over top to cover it up.
— JOSEH
With the Starlink Mini attached, the total height from the glass to the farthest point of the mount and dish is exactly 1.75 inches. Most sunroof shades clear that, but clearance varies by vehicle and model year, so measure yours before ordering.
Yes. The mount attaches to the interior glass of your sunroof or window, so the dish rides inside the cabin and is never exposed to wind. That is exactly what it is designed for.
Yes. We've had it in two of our own vehicles since 2024: on the rear window of a 2018 Ford Mustang, and on the sunroof glass of a 2024 Kia Soul with the sunroof closed. Every design is also tested in real-world conditions by full-time travelers. Owners' reviews describe it in their own vehicles too, including a 2025 Ford F-150 on a three-week road trip, a 2026 Ram, two Toyota 4Runners and a BMW with a panoramic roof.
No. The mount holds with four locking suction cups on interior glass, so there is no drilling and no adhesive on your vehicle, and it removes cleanly.
In most vehicles, yes. The mount is designed for use through sunroof and window glass. Some metallic or athermic glass coatings can weaken satellite signal, and glass varies by vehicle, so test reception at your mounting spot before relying on it.
Not in our testing. Ours has been on the tinted rear window of a 2018 Ford Mustang since 2024, and the tint hasn't pulled away from the glass. That tint was professionally installed, which is the only kind we've tested.
It depends on the glass. Pre-2025 Model Y and Model 3 roofs pass the Starlink signal and this mount works there. Tesla's newer heat-rejecting glass does not: the 2025 and later Model Y roof, the Model Y L roof and rear hatch, and the Cybertruck roof all have a metallic layer that blocks the signal. The front windshield on those vehicles does pass signal, but suction mounts on a windshield are for parked use only. If you're not sure which glass you have, run an app obstruction test before ordering: hold the dish against the roof glass where the mount will go and check the Starlink app for a connection and obstructions.
Wipe the interior glass thoroughly with isopropyl alcohol and let it dry completely. Skip soap and water, since residue interferes with suction, and even a thin film of dust or wax noticeably reduces grip.
Yes. The heavy-duty suction cups are replaceable, and we sell them individually as spare parts.
Remove it from the mount and soak it in hot water to reset its shape, then reinstall it.
Yes. Strength in a printed part comes from how thick its walls are and how much material is inside, and ours are built well beyond a typical hobby print: every part is printed in UV-resistant ASA with solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces. Every design is tested in real-world conditions by full-time travelers.
Every mount is designed and printed in-house just outside Atlanta, Georgia, from UV-resistant ASA.
Every Moonlight Mounts product is designed and printed in-house, and it’s backed by our limited lifetime warranty: for as long as you own it, we replace manufacturing defects and missing parts free of charge and pay the shipping on the replacement. Wear parts such as suction cups and adhesive aren’t covered. Not the right fit? Returns are accepted within 30 days of delivery, including sale items: send us your order number through the contact form, and we’ll reply with approval and the return address. The full warranty terms are in our refund policy.
| Compatible device | Starlink Mini (dish sold separately) |
|---|---|
| Mount location | Interior automotive glass only — sunroof, windshield, or window |
| Vehicle glass | Must pass the Starlink signal — pre-2025 Tesla Model Y and Model 3 roofs do; Tesla's 2025+ Model Y, Model Y L, and Cybertruck roof glass is metallic and blocks it (the windshield passes, parked use only) |
| Suction cups | 4 heavy-duty locking cups, individually replaceable |
| Installed depth | 1.75 in from glass to the farthest point, dish attached |
| Dimensions (short-side style) | 271.8 × 451.8 mm (10.7 × 17.78 in) |
| Dimensions (long-side style) | 410 × 298.9 mm (16.14 × 11.76 in) |
| Material | UV-resistant ASA, recyclable |
| Construction | Solid outer walls about 2.5 mm thick (six passes of material around every edge), a dense 75% internal fill, and solid top and bottom surfaces — far heavier-built than a typical hobby print |
| Cable management | Integrated routing channels |
| Drilling required | None |
| Sunroof shade clearance | Requires at least 1.75 in — measure before ordering |
| Made in | Designed and printed in-house near Atlanta, Georgia, USA |
| Colors | 18 colors |
Overall rating: 4.8 / 5 from 45 reviews.
The Starlink Moonlight Mini Suction Cup mount (SHORT SIDE) fit perfectly on the third-row glass panel (inside) of my 2026 BMW X7 xDrive40i.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Store owner replied: Great photo, Leonel. The third-row panel on an X7 is a new one for us, and the short-side layout fits it cleanly. Thanks for sharing the fit, it'll help other BMW owners figuring out where theirs will go.
Low profile, good adhesion Just as needed Still able to close the shade for the sunroof
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Store owner replied: Thanks for the photo, Gerard. That's the setup it was designed around: dish up on the glass, shade still closes underneath. Enjoy the connection on the road.
Excellent
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Works perfect, no issues
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Holds the Starlink securely and suction cups work great! Fantastic product. Haven’t tested off-road with major bumps, but day-to-day for sure a must buy.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Arrived on time and works exactly as advertised. Very happy with the quality and service.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
product works fine on my panoramic rear roof window in Bmw. was a little hard to get stuck to the glass so I removed the suction cups and reinstalled them so I could push the suction cup lever with the mini in place. been fine since.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Awesome mount
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Fits nicely in a 2026 Ram with moonroof. Can place unit in the back and pull the sun shade over top to cover it up.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Store owner replied: Good to hear it fits the 2026 Ram, Joe. Closing the shade over it is exactly what the low profile is for, so the dish stays out of sight until you need it. Safe travels.
Haven't had the opportunity to use it yet - just received it - I use it on wildfires. can't comment further. looks like it'll work as intended and I wanted.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Store owner replied: Wildfire deployments are exactly the kind of field use this mount was designed around — glad it looks right for the job. A quick isopropyl wipe of the glass and cups before mounting helps hold on dusty sites. If anything needs sorting once it's seen real use, our contact page is open.
Great mount, it’s the most low profile one I found to slide the sunshade over without hitting.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
I bought the Moonlight mount to mount my Starlink in my 2025 F-150 Sunroof for a spring camping trip (Wisconsin to Florida and back). The mounts performed great -- holding the Starlink in place for the entire 3 week adventure. I'm very happy with them. Also, I made this purchase very close to the start of the trip and I was worried about receiving them in time. (I scheduled a camping trip and then my Illini made it to the Final 4, I NEEDED a Starlink to watch the game!) I called them to enquire about when they would be shipped and the delivery time. They arrived with several days to spare -- Great customer service!
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Moonlight mounts is nothing short of outstanding. Yes, that means they are heads and shoulders above any other online company I have dealt with. In short, I had an issue with the mount they sent me, more of my misundertanding of how it would fit in my truck. I contacted them, and they worked with me to the point that they took it back and sent me a new one that fit perfectly. I can't go into the details other than to say they not only appreciated the feedback but actually acted on it. Way to go Moonlight.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Used it on a road trip and it worked great. Thank you!
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
I got two for both vehicles. Excellent
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Fast delivery and easy to assemble!
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
2000 Toyota 4Runner SR5, I like this type of install because it keeps it out of the weather and it fit's exactly as advertised. Thank You
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Easy enough to install, holds my Starlink well without any movement or rattles. I’m 100% aware it likely isn’t meant to hold up to any offroad abuse but it did hold during a 77 mph jump in my truck, so that’s a win in my book.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Great product and great customer service. I asked for expedited shipping due to an upcoming trip, and they made extra effort to ship my StarLink mount quickly. Much appreciated!
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Works great, exactly as described
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Great mount, ty
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Strong suction and fits under the sunroof shade door as described. A+
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Store owner replied: Glad it tucks under the shade the way it should, David. That’s what the 1.75" profile is for, so the dish can stay up on the glass with the shade closed. Enjoy the red, and safe travels.
A+
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Works great on my 4Runner moonroof! No connection issues at all. Great product would buy again.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Great mount. Easy to install. Easy to reposition.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
As described. Thanks for the prompt delivery
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Received the mount installed the Mini antenna in an drove 4hrs down the road without any issue!!! ***I ordered the incorrect mount and they worked with me getting the incorrect mount returned in short order.***
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Thank you for getting this to me fast! It came in so handy. I can just attach to my sunroof and slide the cover over. Love it.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Fits great an hold well in the back window of our Cessna 206. Ran it for a month to test how it held on washbard'ed out, doglegged, flooded, awful jungle runways. Never missed a beat- Ordering a few more-
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Best Starlink mini glass mount out there! Don't hesitate to get anything from this seller. Best design I have come across.
Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)
Moonlight Mounts is the best! Slimmest mount fits between closed sunroof. Very helpful post sales and quick ship and after support. Thanks
It needs more clearance/lower profile. Note in pic wasted 3/8” would be be great if there is an optional mount to allow clearance for sunroof cover to close smoothly
Starlink Mini Suction Cup Mount for Sunroof - Low-Profile
Store owner replied: This mount is designed to sit 1.75 inches from the glass — under most sunroof shades — when the parts are assembled in the intended orientation, and the extra clearance shown here points to an assembly variation. We've since added markings to the mount parts that guide the correct orientation during installation. If a shade still won't clear on your vehicle, reach out through our contact page and we'll help with your specific sunroof.
These mounts were perfect for my Starlink mini, I have a small moonroof and the way they mount on worked perfect!!!
Suction Cup Mount for Starlink Mini - Premium Sunroof & Window Mount System (UV Protected)
Works great…love it in motion
Suction Cup Mount for Starlink Mini - Premium Sunroof & Window Mount System (UV Protected)
Someone recommended this mount on the ford raptor Facebook group and it was on sale during Black Friday! It works great even with ceramic tint. Highly recommend.
Suction cups started falling off the window with a day. Ordered a different mount as this one doesn’t stay.
Starlink Mini Suction Cup Mount
Store owner replied: Suction hold comes down to glass prep and temperature — wiping both the glass and the cups with isopropyl alcohol before mounting makes a real difference, and extreme heat or cold cycles can relax a cup over time. If a cup ever loses grip, contact us and we'll send replacement suction cups free of charge. Sorry this one didn't stay put for you — that's not the experience we design for.
Works great, thanks for the quick shipping!
Suction Cup Mount for Starlink Mini - Premium Sunroof & Window Mount System (UV Protected)
Awesome and friendly experience from start to finish.
Suction Cup Mount for Starlink Mini - Premium Sunroof & Window Mount System (UV Protected)
The quality, small footprint, and low-profile design it provides is top-notch! It's evident that you thought out what was essential in a mount and beautifully executed the build. Well done!
Fits perfectly with the ability to replace the suction cups if they get damaged or worn out with similar ones from big box stores. Had tracking information within hours of placing order and had delivery 3 days later!! Quantity product and great shipping time. Prior to finding this I had used Velcro straps and suction cups to mount in the SUV for while we are in National Parks. While that worked it still moved around quite a bit and was down about 2 inches from the glass. We had good service then so it should be even better now.
Suction Cup Mount for Starlink Mini - Premium Sunroof & Window Mount System (UV Protected)
