Customer Reviews

Real feedback from real customers. Browse verified reviews of our premium, USA-made mounting solutions—from Starlink Mini and Gen3 suction cup mounts to Fanttik wall stations and marine rail systems. Our customers consistently highlight product quality, perfect fitment, and the responsive support that sets Moonlight Mounts apart.

Customer Reviews

Overall rating: 4.9 / 5 from 83 reviews.

We just got an F450 and travel full time in our RV. We have been in a few situations when we did not have any cell service. We weren't sure how we were going to mount our new starlink mini until we found this amazing company! We mounted it with ease and it's been AMAZING! will recommend it to all of our YouTube followers @TrippinwiththeThurmans

Dawn T. 5/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

The Starlink Moonlight Mini Suction Cup mount (SHORT SIDE) fit perfectly on the third-row glass panel (inside) of my 2026 BMW X7 xDrive40i.

Leonel G. 5/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

Store owner replied: Great photo, Leonel. The third-row panel on an X7 is a new one for us, and the short-side layout fits it cleanly. Thanks for sharing the fit, it'll help other BMW owners figuring out where theirs will go.

Low profile, good adhesion Just as needed Still able to close the shade for the sunroof

Gerard Q. 5/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

Store owner replied: Thanks for the photo, Gerard. That's the setup it was designed around: dish up on the glass, shade still closes underneath. Enjoy the connection on the road.

Fits nicely in a 2026 Ram with moonroof. Can place unit in the back and pull the sun shade over top to cover it up.

Joe D. 5/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

Store owner replied: Good to hear it fits the 2026 Ram, Joe. Closing the shade over it is exactly what the low profile is for, so the dish stays out of sight until you need it. Safe travels.

Haven't had the opportunity to use it yet - just received it - I use it on wildfires. can't comment further. looks like it'll work as intended and I wanted.

Martha R. 4/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

Store owner replied: Wildfire deployments are exactly the kind of field use this mount was designed around — glad it looks right for the job. A quick isopropyl wipe of the glass and cups before mounting helps hold on dusty sites. If anything needs sorting once it's seen real use, our contact page is open.

This is a convenient bin to access tools easily. The four star rating is because it does not fit in my storage bag so I cannot attach it to my silhouette. I may Velcro it so it can be easily taking off and out on.

Gina D. 4/5 Verified

Silhouette CAMEO 5 Tool Holder - Side Mount Organizer Caddy (5 Alpha)

Store owner replied: Glad the tool access is working. The caddy is designed to mount semi-permanently on the CAMEO 5's side, so machines that travel in a storage bag are a real edge case — your removable Velcro approach is a smart fit for that.

I bought the Moonlight mount to mount my Starlink in my 2025 F-150 Sunroof for a spring camping trip (Wisconsin to Florida and back). The mounts performed great -- holding the Starlink in place for the entire 3 week adventure. I'm very happy with them. Also, I made this purchase very close to the start of the trip and I was worried about receiving them in time. (I scheduled a camping trip and then my Illini made it to the Final 4, I NEEDED a Starlink to watch the game!) I called them to enquire about when they would be shipped and the delivery time. They arrived with several days to spare -- Great customer service!

Stephen K. 5/5

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

You should disclose that these parts are 3D printed using FDM methods. The pictures on your website have been carefully presented to hide that fact giving the impression they are injection molded or machined. 3D parts are significantly less robust than injection molded or machined parts. I purchased these parts expressly to be stronger than the Starlink mount and I am a bit concerned about them being 3D FDM printed and how they will hold up in high winds.

Mike C. 2/5 Verified

Starlink Gen 3 Roof Mount - Flat Screw-In Surface Mount Kit for Permanent Installation

Store owner replied: Every Moonlight Mounts mount is 3D printed in-house in UV-resistant ASA — it's stated in the "Designed and Printed In-House" section on each product page and detailed on our custom 3D printing page. It's a deliberate engineering choice: ASA is what lets these mounts live on a roof through years of sun, rain, and snow. This mount anchors with eight 18-8 stainless steel screws across four brackets and is designed for permanent outdoor exposure. If any part ever fails in the field, contact us — manufacturing defects are replaced free of charge.

Moonlight mounts is nothing short of outstanding. Yes, that means they are heads and shoulders above any other online company I have dealt with. In short, I had an issue with the mount they sent me, more of my misundertanding of how it would fit in my truck. I contacted them, and they worked with me to the point that they took it back and sent me a new one that fit perfectly. I can't go into the details other than to say they not only appreciated the feedback but actually acted on it. Way to go Moonlight.

Paul M. 5/5 Verified

Starlink Mini Suction Cup Mount - Sunroof, Glass Window Mount (UV Protected)

This mount for the Peplink antenna worked great. I used it on Amtrak, and it held up wonderfully for hours while in motion. Super easy to use, and packs up pretty well. The only cons: 1) They shipped within 24 hours of ordering which is awesome, although the economy free shipping was a little slow. Could be useful to have an upgraded shipping option for a fee for those who need it quickly. 2) Would be nice if the suction cups were double-articulated so it would fold up a bit smaller for storage. That might be a tradeoff though, because it's a very sturdy mount as-is, and an extra joint might make it not perform as well.

Paul K. 5/5 Verified

Peplink Slim MIMO Suction Cup Mount - Glass Window Mounting System (UV Protected)

Store owner replied: Hours of in-motion use on Amtrak is exactly what this mount is built for — great to hear it held up. On shipping: a faster paid option is available at checkout alongside the free economy rate, for anyone who needs a mount quickly. The double-articulation idea is good feedback — you've read the tradeoff right, sturdiness comes first — and we'll look into refinements of the model with packability in mind. Thanks for the detailed writeup.

Customer photo review of Starlink Gen3 Suction Cup Mount - Residential Gen 3 Rev4 Standard UTA-232 - Panoramic Sunroof, Glass, Moonroof, Window System (UV Protected)

Mounts are very easy to install on dish antenna. Very sturdy and fits perfectly. Just follow instructions for placement on the corners by the number that is on each mount. Recommend just a bit of water on the suction cups prior to placement on glass. Also press suction cups tightly to glass and then flip up lock. Check that it is locked onto glass, as it may take a couple of attempts to get good adhesion. Great product, highly recommend.

Bruce M. 5/5 Verified

Starlink Gen3 Suction Cup Mount - Residential Gen 3 Rev4 Standard UTA-232 - Panoramic Sunroof, Glass, Moonroof, Window System (UV Protected)